JET 708663PK JTAS-10XL50-W1 10-Inch Left Tilt 3-Horsepower 10-Inch Cabinet Saw with 50-Inch Xacta II Fence, 2 Cast Iron Extension Wings, Table Board, and Legs, 230-Volt 1-Phase (B0000223L6) - Reviews and Prices
Doctors Book Store
doctorsbookstore.com Ratings and Reviews - Reviews and Prices
Home / Tools / JET 708663PK JTAS-10XL50-W1 10-Inch Left Tilt 3-Horsepower 10-Inch Cabinet Saw with 50-Inch Xacta II Fence, 2 Cast Iron Extension Wings, Table Board, and Legs, 230-Volt 1-Phase
JET 708663PK JTAS-10XL50-W1 10-Inch Left Tilt 3-Horsepower 10-Inch Cabinet Saw with 50-Inch Xacta II Fence, 2 Cast Iron Extension Wings, Table Board, and Legs, 230-Volt 1-Phase (B0000223L6) - Customer Reviews, Information, Ratings, and Prices
JET 708663PK JTAS-10XL50-W1 10-Inch Left Tilt 3-Horsepower 10-Inch Cabinet Saw with 50-Inch Xacta II Fence, 2 Cast Iron Extension Wings, Table Board, and Legs, 230-Volt 1-Phase (B0000223L6) - Reviews and Prices
10" XACTA SAW Left Tilting Arbor Tablesaw Left tilting blade for greater accuracy and safety Choice of 3 HP, single phase; 5 HP, single or three phase Comes standard with the XACTA FENCE II 30" or 50" Commercial Both fences also offer a 12" rip capacity to the left of the blade Large precision-ground 27" x 40" cast iron table with two extension wings Reinforced steel enclosed cabinet Built-in slanted cabinet floor leading toward the standard 4" steel dust port Convenient front left rail-mounted magnetic on/off switch Chrome-plated handwheels Hinged steel motor cover Totally enclosed, fan-cooled motor Wide stance trunnion design to eliminate vibration and insure perfect blade alignment Three matched v-belts mounted between the two arbor bearings for longer bearing life and greater stability T-slotted table with precision mitre gauge See-through blade guard with splitter and anti-kickback pawls One-piece precision ground arbor Standard Equipment XACTA FENCE II Precision fence system Mitre gauge Blade guard/splitter Cast iron extension wings Cabinet-style stand Dust port Blade not included XACTA-LIFT All JTAS-10 Kits are available with the XACTA-LIFT router insert and deluxe fence built in. To order any JTAS-10 tablesaw with the XACTA LIFT kit replace the PK with RXK or saws with Deluxe XACTA FENCE II replace the DK with DXK. These saws will come standard with the precut accessory wood table, XACTA LIFT router insert, deluxe router fence and support legs Dare to Compare - JTAS-10 10" Tablesaw Model JET JTAS-10 Models Delta Unisaw Models General 50-275 4Ã Dust Port Built-in Optional Built-in Solid Cast Iron Table Size w/ Ext. (in) 27 x 40 27 x 28 28 x 36 Extended Mitre Gauge Bar Standard N/A N/A Accessory Wood Table Board Standard Standard Optional Support Legs Standard Standard Optional Fence XACTA Fence Biesmeyer General Vertical Adjustment Screws Standard N/A N/A Quick Change Side Panels Yes No No
While this JET saw beats its closest competitor on price, it also offers some advantages in terms of design and construction. Placing the quick-connect electrical plug right at the saw so the user doesn't have to search out the wall socket for every blade change is just one small example of JET's attention to detail. The stand for this saw is made of a heavy-gauge metal, and features a hinged motor cover and a 4- inch dust port for easy connection to a dust-collection system. A change in the hole pattern on the fence rails means lefties can shift the set up to their preference. The left-tilting arbor is another mark in this saw's favor. Tilting the blade away from the fence negates the need for a sacrificial fence and reduces the risk of the piece binding under the blade. This saw's most impressive feature is the smooth action of the blade height-adjustment mechanism. Not only will users save their wrists and knuckles, but they'll also save time by being able to crank the blade to the exact height necessary with vastly fewer test runs for every rabbet, dado, tongue, and groove. Finally, we really appreciate JET's use of totally enclosed fan-cooled motors on this and every other saw the company makes. While this may add a little to the final cost of the saw, the extra life and reliability this gives the motors is well worth it. This saw is an excellent choice in its price range. --Nancy Gleason
Customer Reviews:
Avg. Customer Rating: 4.0 / 5.0
NOT TEFC IN ANY WAY:
Just out of warranty I took this 3hp motor to the repair shop. It kept tripping the breaker. He said he never experienced so much saw dust inside a motor in his life. Packed in tight. This is 'NOT' A Totally Enclosed Fan Cooled motor. It has a space between the wiring connection box at the ground wire that draws saw dust in. The claims that this is TEFC are false to the point of deceptive. I am so disappointed in the import choices we have been forced to except as the industry standard. Powermatic, Jet,... more info
junk motors:
the motor is junk. less than three years with light use, two run capacitors it funally quit working. no other motor fits. Ok I will buy one from jet what other choice do I have. The next problem is a new motor is 6 weeks on back order. Must be going through a lot of them. I cant wait to much business will be lost. so i took the leeson motor off my planer made an adapter plate at the local welding shop and reamed the pulley to fit the leeson motor. LASTJET TOOL I OR ANY ONE I KNOW WILL EVER BUY
It's a dream:
I replaced a 15 year old Craftsman contractors saw that I had tweaked and adjusted until I thought it was as good as it could be. I had replaced the belt with a link belt, the pulleys with a set a friend had machined, and added the trunnion adjuster from In-Line Industries. I was satisfied with the results until... The delivery of my new Jet was prompt and courteous. The trucking company scheduled delivery for 1:oo pm, and I was called by the driver 3 times before the delivery to update me on the... more info
Great Saw / Poor Motor:
I bought my saw in March 2003. It has not had heavy usage. I think the overall quality of the saw is good (flat table, fence in line out of the crate, vibration practically non-existant, large handwheels, good fit and finish and good power). The motor is the exception to the quality. It is cheaply made and failed in the middle of a project. I replaced the start capacitor (it had overheated and was leaking oil) and upon startup, the motor lost rpm, stopped and completely blew out the replacement start... more info
